罗茨鼓风机齿轮的拆卸是一项技术工作。今天，小编在网上看到一篇文章。他想拆卸和修理罗茨鼓风机，但他不知道如何拆卸齿轮。让我们简单谈谈如何拆卸齿轮！

　　The disassembly of Roots blower gears is a technical task. Today, the editor saw an article online. He wants to disassemble and repair the Roots blower, but he doesn't know how to disassemble the gears. Let's briefly talk about how to disassemble gears!

　　1.拆卸罗茨风机齿轮前言

　　1. Disassemble the Roots blower gear Preface

　　首先，我们需要了解罗茨风机齿轮的配合方式，如锥度配合.过渡配合.锥度过渡配合，对于过渡配合齿轮，需要通过拉拔器拆卸，如何通过液压安装，需要通过液压拆卸。拆卸罗茨鼓风机齿轮时，要观察，不要硬弓，硬卸！它会损坏轴和齿轮。

　　Firstly, we need to understand the fitting method of Roots blower gears, such as taper fitting Transitional cooperation Conical transition fit, for the transition fit gear, it needs to be disassembled through a puller. How to install it through hydraulic installation requires hydraulic disassembly. When disassembling the Roots blower gear, observe carefully and do not forcefully bow or remove it! It will damage the shaft and gears.

　　2.罗茨风机齿轮压压油泵拆卸

　　2. Disassembly of Roots blower gear pressure oil pump

　　小编先上图，这张图是上面的罗茨鼓风机齿轮，拆卸方式是手动压油泵，然后拆卸齿轮。

　　The editor starts with the above picture, which shows the gear of the Roots blower. The disassembly method is to manually press the oil pump and then disassemble the gear.

　　一般没有知识和工具，请不要拆卸罗茨鼓风机齿轮。手动压制油泵的方式如下：

　　Without knowledge and tools, please do not disassemble the Roots blower gear. The method of manually pressing the oil pump is as follows:

　　3.锥度配合齿轮拆卸

　　3. Disassembly of taper fitting gear

　　上面的动图显示锥度配合的齿轮，通过拉拔器拆卸。

　　The above diagram shows a gear with a tapered fit, which can be disassembled using a puller.

　　4.另附

　　4. Attached separately

　　①没有工具请不要自行拆卸；

　　① Please do not disassemble without tools;

　　②拆卸罗茨风机齿轮以确保；

　　② Disassemble the gear of the Roots blower to ensure safety;

　　③做好标记；

　　③ Make proper markings;

　　④注意空调；

　　④ Pay attention to the air conditioning;

　　⑤如无法维修，请联系厂家拆卸。

　　⑤ If it cannot be repaired, please contact the manufacturer for disassembly.

　　1.罗茨风机维修流程

　　1. Maintenance process of Roots blower

　　罗茨风机维修流程:拆卸油箱.齿轮.轴承.端盖叶轮。

　　Roots blower maintenance process: Disassemble the fuel tank gear Bearing. End cover impeller.

　　2.为什么要修理？风机故障是什么？

　　Why repair? What is a fan malfunction?

　　风机维修的主要原因是：更换轴承，检查风机转子与墙板、转子与壳体之间的间隙.转子检查。

　　The main reasons for fan maintenance are: replacing bearings, checking the gaps between the fan rotor and wall panels, and between the rotor and the housing Rotor inspection.

　　3.齿轮如何拆卸，轴承如何拆卸？

　　How to disassemble gears and bearings?

　　罗茨鼓风机齿轮采用拉马，轴承座采用顶杆。关于齿轮拆卸的注意事项，可以点击这里:齿轮拆卸动图

　　The gear of the Roots blower adopts a puller, and the bearing seat adopts a top rod. Regarding the precautions for gear disassembly, you can click here: Gear disassembly diagram

　　4.拆卸的重点和难点是什么？

　　What are the key and difficult points of disassembly?

　　拆卸机器的困难在于同步齿轮，齿轮为直齿齿合。主动齿轮用液压拉马拖出，从动齿轮用自己的6个齿轮M20螺栓孔加顶杆顶出。轴承座用顶杆顶出。注意顶杆的对称应力，否则会损坏轴承座。轴承座的材料是铸铁。其他的都很简单。安装时，先拆装，再拆装。注意各部位的缝隙。

　　The difficulty in dismantling the machine lies in synchronizing the gears, which are spur gears. The driving gear is pulled out with a hydraulic puller, and the driven gear is pushed out with its own 6 M20 bolt holes and a top rod. The bearing seat is pushed out with a top rod. Pay attention to the symmetrical stress of the top rod, otherwise it may damage the bearing seat. The material of the bearing seat is cast iron. Everything else is very simple. When installing, disassemble and assemble first, then disassemble and assemble again. Pay attention to the gaps in each part.

　　在选择罗茨鼓风机型号时，需要一个框架图也非常重要。如果你清楚地了解罗茨鼓风机的结构，就更容易使用。罗茨鼓风机主要由以下部分组成:

　　It is also very important to have a framework diagram when choosing a Roots blower model. If you have a clear understanding of the structure of Roots blower, it will be easier to use. The Roots blower mainly consists of the following parts:

　　机壳.墙板.叶轮.油箱.五部分组成。

　　Chassis Wall panels impeller. Fuel tank Composed of five parts.

　　外壳：主要支撑（墙板）.叶轮.）和固定效果。和固定效果。

　　Shell: Main support (wall panel) impeller. ）And fixed effects. And fixed effects.

　　墙板：主要用于连接外壳和叶轮，支撑叶轮的旋转，起到端面密封的作用。

　　Wall panel: mainly used to connect the shell and impeller, support the rotation of the impeller, and play a role in end face sealing.

　　叶轮:是罗茨风机的旋转部分，分为二叶和三叶，但由于三叶的出气脉冲小于二叶，.噪音更小.运行更稳定等诸多优点已逐渐取代二叶罗茨风机。

　　Impeller: It is the rotating part of a Roots blower, divided into two blades and three blades. However, due to the fact that the exhaust pulse of the three blades is smaller than that of the two blades Less noise Many advantages such as more stable operation have gradually replaced the two blade Roots fan.

　　油箱：主要用于储存润滑齿轮和轴承的润滑油。

　　Oil tank: mainly used to store lubricating oil for lubricating gears and bearings.

　　本文由 罗茨鼓风机  友情奉献.更多有关的知识请点击  http://www.sdyshjx.com/  真诚的态度.为您提供为全面的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

　　This article is a friendly contribution from Roots blower For more related knowledge, please click http://www.sdyshjx.com/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.