仓泵（又称仓式泵）是一种在高压下输送粉状物料的气力输送装置仓泵（又称仓式泵）是一种在高压下输送粉状物料的密相动压气力输送装置，广泛应用于工业领域。以下是对仓泵的具体介绍：

　　Warehouse pump (also known as bin pump) is a pneumatic conveying device that transports powdered materials under high pressure. Warehouse pump (also known as bin pump) is a dense phase dynamic pressure pneumatic conveying device that transports powdered materials under high pressure and is widely used in the industrial field. The following is a specific introduction to the bin pump:

　　1. 工作原理

　　1. Working principle

　　进料过程：打开进料阀和排气阀，仓式泵在常压下进料，直到水平料位计发出仓满指示信号为止。

　　Feeding process: Open the feeding valve and exhaust valve, and feed the silo pump under normal pressure until the horizontal level gauge sends out a full silo indicator signal.

　　加压过程：关闭进料阀和排气阀，然后打开高压气阀使罐内加压。

　　Pressurization process: Close the feed valve and exhaust valve, then open the high-pressure air valve to pressurize the tank.

　　输送过程：当达到操作压力后，打开输送空气阀门和卸料阀，物料开始输送。

　　Conveying process: When the operating pressure is reached, open the conveying air valve and discharge valve, and the material begins to be conveyed.

　　清吹过程：由压力开关、料位计或时间继电器显示出输送结束。此时关闭高压气阀和卸料阀，使全部压缩空气都用来清吹输送管道；同时打开排气阀，使罐内压力减至常压状态。

　　Clear blowing process: The conveying end is displayed by a pressure switch, level gauge, or time relay. At this time, close the high-pressure air valve and discharge valve, so that all compressed air is used to blow the conveying pipeline; Simultaneously open the exhaust valve to reduce the pressure inside the tank to atmospheric pressure.

　　2. 主要特点

　　2. Main features

　　高节能：由于流化结构合理，物料流化状态良好，耗气量明显比同类产品低。

　　High energy saving: Due to the reasonable fluidization structure and good material fluidization state, the gas consumption is significantly lower than similar products.

　　料气比高：流化效果好，耗气量少，料气比自然就高。通过试验室试验，当量距离在500米以内，料气比达到30Kg（灰）/Kg（气）以上。

　　High material to gas ratio: good fluidization effect, low gas consumption, naturally high material to gas ratio. Through laboratory tests, the equivalent distance is within 500 meters, and the material to gas ratio reaches 30kg (ash)/Kg (gas) or more.

　　物料流速低：由于耗气量少，料气比高，物料在管道中呈部分流运动，实现了动静压输送，因此物料输送时流速低，设备的阀门及管路磨损量小，易损件寿命长。

　　Low material flow rate: Due to low gas consumption and high material to gas ratio, the material flows partially in the pipeline, achieving dynamic and static pressure conveying. Therefore, the material flow rate is low during transportation, and the wear of equipment valves and pipelines is small, resulting in long service life of vulnerable parts.

　　调节功能强：具有一、二次进气调节等多种调节手段，能使系统在最佳用气量配比及优良的流化状态下运行。

　　Strong adjustment function: It has multiple adjustment methods such as primary and secondary air intake adjustment, which can enable the system to operate at the optimal air consumption ratio and excellent fluidization state.

　　排堵方式独特：采用了倒抽式排堵方式，简单易行，运行合理，只需将料气混合物通过排堵阀及管道引至料仓或烟道入口。

　　Unique blockage removal method: Adopting a reverse suction blockage removal method, it is simple and easy to operate, and runs reasonably. Only the material gas mixture needs to be led to the silo or flue inlet through the blockage removal valve and pipeline.

　　配套设施易解决：由于耗气量小，速度低，因此料仓料气分离及过滤设备可以比一般仓式泵所配备的要小，造成的空气污染也小。

　　Easy to solve supporting facilities: Due to low gas consumption and speed, the material gas separation and filtration equipment in the silo can be smaller than those equipped with general silo pumps, resulting in less air pollution.

　　能耗系数小：仓式泵输送系统的能耗系数在65KW.h/t.m以下。

　　Low energy consumption coefficient: The energy consumption coefficient of the silo pump conveying system is below 65KW. h/t.m.

　　自动化程度高：采用了可编程（PLC）控制系统，整个工作过程可以完全实施自动化。该系统可设定为自动、手动操作方式。主控柜安装于系统控制室内。

　　High degree of automation: Adopting a programmable logic controller (PLC) control system, the entire work process can be fully automated. The system can be set to automatic or manual operation modes. The main control cabinet is installed in the system control room.

　　3. 技术参数

　　3. Technical parameters

　　泵体内径：800mm至2400mm不等。

　　Pump body inner diameter: ranging from 800mm to 2400mm.

　　总容积：0.35m?至9.25m?不等。

　　Total volume: ranging from 0.35m to 9.25m.

　　配用输送管径：DN50至DN175不等。

　　Suitable conveying pipe diameter: ranging from DN50 to DN175.

　　使用温度：≤120℃。

　　Operating temperature: ≤ 120 ℃.

　　最大输送距离：>500~1500m。

　　Maximum conveying distance:>500~1500m.

　　最大设计压力：0.78Mpa。

　　Maximum design pressure: 0.78Mpa.

　　输送量：3m?/h至42m?/h不等。

　　Conveying capacity: ranging from 3m?/h to 42m?/h.

　　4. 应用范围

　　4. Scope of application

　　电厂粉煤灰输送：仓泵可用于电厂粉煤灰的输送，不受自然条件影响，能确保物料不受潮，环保无污染。

　　Power plant fly ash transportation: The bin pump can be used for the transportation of power plant fly ash, which is not affected by natural conditions, can ensure that the material is not affected by moisture, and is environmentally friendly and pollution-free.

　　水泥及生料输送：适用于水泥厂的水泥及生料输送，提高生产效率，降低能耗。

　　Cement and raw material transportation: Suitable for cement and raw material transportation in cement plants, improving production efficiency and reducing energy consumption.

　　矿粉输送：可用于矿山行业的矿粉输送，适应性强，能满足不同物料的输送需求。

　　Mineral powder transportation: It can be used for mineral powder transportation in the mining industry, with strong adaptability, and can meet the transportation needs of different materials.

　　总的来说，仓泵以其高效节能、料气比高、物料流速低等特点，在工业领域得到了广泛应用。无论是电厂粉煤灰、水泥生料还是矿粉等粉状物料的输送，仓泵都能提供稳定可靠的解决方案。对于需要处理粉状物料的企业来说，仓泵无疑是一个值得考虑的选择。

　　Overall, bin pumps have been widely used in the industrial field due to their high efficiency, energy saving, high material to gas ratio, and low material flow rate. Whether it is the transportation of powdered materials such as power plant fly ash, cement raw materials, or mineral powder, bin pumps can provide stable and reliable solutions. For enterprises that need to handle powdered materials, warehouse pumps are undoubtedly a worthwhile choice to consider.

　　本文由 仓泵  友情奉献.更多有关的知识请点击  http://www.sdyshjx.com/  真诚的态度.为您提供为全面的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

　　This article is a friendly contribution from Cang Pump For more related knowledge, please click http://www.sdyshjx.com/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Stay tuned　　仓泵（又称仓式泵）是一种在高压下输送粉状物料的气力输送装置仓泵（又称仓式泵）是一种在高压下输送粉状物料的密相动压气力输送装置，广泛应用于工业领域。以下是对仓泵的具体介绍：

　　Warehouse pump (also known as bin pump) is a pneumatic conveying device that transports powdered materials under high pressure. Warehouse pump (also known as bin pump) is a dense phase dynamic pressure pneumatic conveying device that transports powdered materials under high pressure and is widely used in the industrial field. The following is a specific introduction to the bin pump:

　　1. 工作原理

　　1. Working principle

　　进料过程：打开进料阀和排气阀，仓式泵在常压下进料，直到水平料位计发出仓满指示信号为止。

　　Feeding process: Open the feeding valve and exhaust valve, and feed the silo pump under normal pressure until the horizontal level gauge sends out a full silo indicator signal.

　　加压过程：关闭进料阀和排气阀，然后打开高压气阀使罐内加压。

　　Pressurization process: Close the feed valve and exhaust valve, then open the high-pressure air valve to pressurize the tank.

　　输送过程：当达到操作压力后，打开输送空气阀门和卸料阀，物料开始输送。

　　Conveying process: When the operating pressure is reached, open the conveying air valve and discharge valve, and the material begins to be conveyed.

　　清吹过程：由压力开关、料位计或时间继电器显示出输送结束。此时关闭高压气阀和卸料阀，使全部压缩空气都用来清吹输送管道；同时打开排气阀，使罐内压力减至常压状态。

　　Clear blowing process: The conveying end is displayed by a pressure switch, level gauge, or time relay. At this time, close the high-pressure air valve and discharge valve, so that all compressed air is used to blow the conveying pipeline; Simultaneously open the exhaust valve to reduce the pressure inside the tank to atmospheric pressure.

　　2. 主要特点

　　2. Main features

　　高节能：由于流化结构合理，物料流化状态良好，耗气量明显比同类产品低。

　　High energy saving: Due to the reasonable fluidization structure and good material fluidization state, the gas consumption is significantly lower than similar products.

　　料气比高：流化效果好，耗气量少，料气比自然就高。通过试验室试验，当量距离在500米以内，料气比达到30Kg（灰）/Kg（气）以上。

　　High material to gas ratio: good fluidization effect, low gas consumption, naturally high material to gas ratio. Through laboratory tests, the equivalent distance is within 500 meters, and the material to gas ratio reaches 30kg (ash)/Kg (gas) or more.

　　物料流速低：由于耗气量少，料气比高，物料在管道中呈部分流运动，实现了动静压输送，因此物料输送时流速低，设备的阀门及管路磨损量小，易损件寿命长。

　　Low material flow rate: Due to low gas consumption and high material to gas ratio, the material flows partially in the pipeline, achieving dynamic and static pressure conveying. Therefore, the material flow rate is low during transportation, and the wear of equipment valves and pipelines is small, resulting in long service life of vulnerable parts.

　　调节功能强：具有一、二次进气调节等多种调节手段，能使系统在最佳用气量配比及优良的流化状态下运行。

　　Strong adjustment function: It has multiple adjustment methods such as primary and secondary air intake adjustment, which can enable the system to operate at the optimal air consumption ratio and excellent fluidization state.

　　排堵方式独特：采用了倒抽式排堵方式，简单易行，运行合理，只需将料气混合物通过排堵阀及管道引至料仓或烟道入口。

　　Unique blockage removal method: Adopting a reverse suction blockage removal method, it is simple and easy to operate, and runs reasonably. Only the material gas mixture needs to be led to the silo or flue inlet through the blockage removal valve and pipeline.

　　配套设施易解决：由于耗气量小，速度低，因此料仓料气分离及过滤设备可以比一般仓式泵所配备的要小，造成的空气污染也小。

　　Easy to solve supporting facilities: Due to low gas consumption and speed, the material gas separation and filtration equipment in the silo can be smaller than those equipped with general silo pumps, resulting in less air pollution.

　　能耗系数小：仓式泵输送系统的能耗系数在65KW.h/t.m以下。

　　Low energy consumption coefficient: The energy consumption coefficient of the silo pump conveying system is below 65KW. h/t.m.

　　自动化程度高：采用了可编程（PLC）控制系统，整个工作过程可以完全实施自动化。该系统可设定为自动、手动操作方式。主控柜安装于系统控制室内。

　　High degree of automation: Adopting a programmable logic controller (PLC) control system, the entire work process can be fully automated. The system can be set to automatic or manual operation modes. The main control cabinet is installed in the system control room.

　　3. 技术参数

　　3. Technical parameters

　　泵体内径：800mm至2400mm不等。

　　Pump body inner diameter: ranging from 800mm to 2400mm.

　　总容积：0.35m?至9.25m?不等。

　　Total volume: ranging from 0.35m to 9.25m.

　　配用输送管径：DN50至DN175不等。

　　Suitable conveying pipe diameter: ranging from DN50 to DN175.

　　使用温度：≤120℃。

　　Operating temperature: ≤ 120 ℃.

　　最大输送距离：>500~1500m。

　　Maximum conveying distance:>500~1500m.

　　最大设计压力：0.78Mpa。

　　Maximum design pressure: 0.78Mpa.

　　输送量：3m?/h至42m?/h不等。

　　Conveying capacity: ranging from 3m?/h to 42m?/h.

　　4. 应用范围

　　4. Scope of application

　　电厂粉煤灰输送：仓泵可用于电厂粉煤灰的输送，不受自然条件影响，能确保物料不受潮，环保无污染。

　　Power plant fly ash transportation: The bin pump can be used for the transportation of power plant fly ash, which is not affected by natural conditions, can ensure that the material is not affected by moisture, and is environmentally friendly and pollution-free.

　　水泥及生料输送：适用于水泥厂的水泥及生料输送，提高生产效率，降低能耗。

　　Cement and raw material transportation: Suitable for cement and raw material transportation in cement plants, improving production efficiency and reducing energy consumption.

　　矿粉输送：可用于矿山行业的矿粉输送，适应性强，能满足不同物料的输送需求。

　　Mineral powder transportation: It can be used for mineral powder transportation in the mining industry, with strong adaptability, and can meet the transportation needs of different materials.

　　总的来说，仓泵以其高效节能、料气比高、物料流速低等特点，在工业领域得到了广泛应用。无论是电厂粉煤灰、水泥生料还是矿粉等粉状物料的输送，仓泵都能提供稳定可靠的解决方案。对于需要处理粉状物料的企业来说，仓泵无疑是一个值得考虑的选择。

　　Overall, bin pumps have been widely used in the industrial field due to their high efficiency, energy saving, high material to gas ratio, and low material flow rate. Whether it is the transportation of powdered materials such as power plant fly ash, cement raw materials, or mineral powder, bin pumps can provide stable and reliable solutions. For enterprises that need to handle powdered materials, warehouse pumps are undoubtedly a worthwhile choice to consider.

　　本文由 仓泵  友情奉献.更多有关的知识请点击  http://www.sdyshjx.com/  真诚的态度.为您提供为全面的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

　　This article is a friendly contribution from Cang Pump For more related knowledge, please click http://www.sdyshjx.com/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Stay tuned