旋转供料器，在人们生活中应用广泛，卸料阀主要是利用行星转动原理，输入输出在同一轴线上，而且有与电机直联一体的独特性，这样的直线型设计大大缩短了它的运转时间，同时使用效率没有降低，因而结构紧凑造型美观新颖、体积小、重量轻，卸料阀常用在气力输出系统中，对于压力输出系统或负压输出系统，卸料阀可以均匀，连续地向输料管供料，以保证气力输出管内的气、固体比较稳定，从而使气力输送能正常工作，同时，又能将卸料阀的上、下部气压隔断而起到锁气作用。因此，卸料器是气力输送系统中常用的重要部件。旋转供料器又称旋转阀，它的使用更加方便了除尘设备的清灰功能，而本机具有过载能力强，耐冲击惯性力矩小，适用于起动频繁和反正转。看了上面的介绍大家应该对卸料阀有了进一步的了解。很多消费者都问小编为什么同样的卸料价格上相差那么多，今天就为大家总结一下影响到卸料阀价格的原因都有哪些吧。

　　Rotary feeders are widely used in people's daily lives. The discharge valve mainly utilizes the principle of planetary rotation, with input and output on the same axis, and has the unique feature of being directly connected with the motor. This linear design greatly shortens its operating time, while the efficiency of use is not reduced. Therefore, the structure is compact, beautiful, small in size, and light in weight. The discharge valve is commonly used in pneumatic output systems. For pressure output systems or negative pressure output systems, the discharge valve can uniformly and continuously supply material to the conveying pipe to ensure that the gas and solid in the pneumatic output pipe are relatively stable, so that the pneumatic conveying can work normally. At the same time, it can also block the upper and lower air pressure of the discharge valve and play a role in air lock. Therefore, the unloader is an important component commonly used in pneumatic conveying systems. The rotary feeder, also known as the rotary valve, is more convenient to use for the dust cleaning function of the dust removal equipment. This machine has strong overload capacity, low impact resistance inertia moment, and is suitable for frequent starting and reverse rotation. After reading the above introduction, everyone should have a further understanding of the discharge valve. Many consumers have asked me why there is such a big difference in the same discharge price. Today, I will summarize the reasons that affect the price of discharge valves.

　　一：卸料器铸件重量决定着价格：之所以各个厂家的价格存在很大的不同，除其设备本身铸件质量的因素外，卸料器的重量也是它价格不同的一个主要因素。卸料器的成本是按铸件的重量进行成本核算的，在设计时对铸件的重量已经做过估算，同样的铸件重量决定价格。

　　1： The weight of the unloader casting determines the price: the reason why the prices of different manufacturers vary greatly is not only due to the quality of the casting of their equipment, but also because the weight of the unloader is a major factor in its price. The cost of the unloader is calculated based on the weight of the casting. The weight of the casting has already been estimated during design, and the same casting weight determines the price.

　　二：旋转供料器结构决定着价格：卸料器的结构也是它价格不同的原因，卸料器结构分为多种，为了适应不同的工作环境而进行特殊的改进，同样规格的卸料器在样式上也是分为简型和重型之分，简型现在是普遍生产的设备，但重型卸料器是可以进行各部分离，在卸料器结构的基础上，加装了易分离部件易于维修。

　　2： The structure of the rotary feeder determines the price: the structure of the unloader is also the reason for its different prices. The unloader structure is divided into various types, and special improvements are made to adapt to different working environments. Dischargers of the same specifications are also divided into simple and heavy types in style. Simple types are now commonly produced equipment, but heavy unloaders can separate various parts. On the basis of the unloader structure, easy to separate components are added for easy maintenance.

　　三：卸料器材料的不同也决定着价格：在所卸物料为高温、腐蚀性物料，或者化工、食品等行业应用时，铸铁卸料器就远远达不到工况、卫生等使用要求，不能再应用。

　　3： The different materials of the unloader also determine the price: when the unloaded material is high-temperature, corrosive, or used in industries such as chemical and food, the cast iron unloader cannot meet the requirements of working conditions, hygiene, and other uses, and cannot be used anymore.

　　叶轮给料机在操作中如果出现粘料的情况该如何解决呢，是什么原因造成叶轮给料机粘料问题的呢，下面我们就一起来看看吧。投产后，经常出现叶轮给料机内石块卡壳而导致立磨跳停事故。经检查发现给料机料槽内粘满黄土，清理给料机内积料后再开磨正常。

　　How to solve the problem of material sticking in the impeller feeder during operation, and what causes the problem of material sticking in the impeller feeder? Let's take a look together below. After production, there are often incidents of stone jamming inside the impeller feeder, causing the vertical mill to jump and stop. After inspection, it was found that the feeding trough of the feeder was covered with loess. After cleaning the accumulated material in the feeder, it was normal to start grinding again.

　　为防止因为旋转供料器引起的立磨跳停，只有每天定时停机清理给料机料槽内粘料，造成立磨频繁停机。叶轮给料机进料落差5到6m，且原料中含有黄土，当原料喂入叶轮给料机时，黄土粘到叶轮给料机料槽钢板上，之后在后续原料冲击下黄土粘得更加密实、牢固。

　　To prevent the vertical mill from jumping due to the rotating feeder, it is necessary to stop the machine at regular intervals every day to clean the sticky material in the feeder trough, which may cause frequent shutdowns of the vertical mill. The feed drop of the impeller feeder is 5 to 6 meters, and the raw material contains loess. When the raw material is fed into the impeller feeder, the loess adheres to the steel plate of the feeding trough of the impeller feeder, and then under the subsequent impact of the raw material, the loess adheres more tightly and firmly.

　　随着工作时间的延长，料槽粘的黄土越来越多，当给料机料槽内基本粘满黄土时原料中的石块容易卡到给料机与壳体之间，造成给料机瞬间堵转引起立磨跳停。

　　With the extension of working hours, more and more yellow soil is stuck in the feeding trough. When the feeding trough of the feeder is basically filled with yellow soil, the stones in the raw material are prone to get stuck between the feeder and the shell, causing the feeder to instantly stall and causing the vertical mill to jump and stop.

　　本文由  旋转供料器   友情奉献.更多有关的知识请点击  http://www.sdyshjx.com/  真诚的态度.为您提供为全面的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

　　This article is a friendly contribution from the rotating feeder For more related knowledge, please click http://www.sdyshjx.com/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.