仓式气力输送泵采用正压气力输送方式输送物料。可根据工厂实际情况灵活布置输送管道，实现集中、分散、长距离、大容量、高级差输送。由于该装置在整个运输过程中不受外界环境影响，能保证物料不受水分影响，运输环保无污染，那气力输送仓泵的主要结构是什么呢？今天小编整理了一下！

　　The warehouse type pneumatic conveying pump uses positive pressure pneumatic conveying to transport materials. Flexible arrangement of conveying pipelines can be made according to the actual situation of the factory, achieving centralized, decentralized, long-distance, high-capacity, and high-grade conveying. Due to the fact that the device is not affected by the external environment during the entire transportation process, it can ensure that the materials are not affected by moisture, and the transportation is environmentally friendly and pollution-free. What is the main structure of the pneumatic conveying bin pump? Today, the editor has organized it!

　　01进料装置

　　01 Feeding device

　　进料装置又称进料阀，一般设置在气力输送仓泵上方。进料阀和仓泵连接成一个整体结构。打开和关闭控制由直行程油缸通过摇臂驱动活门旋转90°完成。这种结构的阀门具有良好的密封性能，能够满足硅粉、粉煤灰等恶劣环境的使用要求。橡胶本身对颗粒有一定的包容性，且硬度高，所以我们采用氟橡胶材料制作上下密封圈，阀门开启时可以紧紧包裹在阀瓣上。

　　The feeding device, also known as the feeding valve, is generally installed above the pneumatic conveying bin pump. The feed valve and the bin pump are connected as a whole structure. The opening and closing control is achieved by the straight stroke cylinder driving the valve to rotate 90 ° through the rocker arm. This type of valve structure has good sealing performance and can meet the requirements of harsh environments such as silica fume and fly ash. Rubber itself has a certain tolerance for particles and high hardness, so we use fluororubber material to make upper and lower sealing rings, which can tightly wrap around the valve disc when the valve is opened.

　　02排气装置

　　02 Exhaust system

　　排气装置也称为排气阀。它是一种主动打开和关闭阀盘的阀门，通过依靠介质本身的活动来避免介质回流。一般布置在气力输送仓泵的上部，其作用是通过钢瓶的作用打开或关闭阀门，将气力输送仓泵内的残余气体排至储仓。

　　Exhaust system is also known as exhaust valve. It is a valve that actively opens and closes the valve disc, avoiding medium backflow by relying on the activity of the medium itself. Generally arranged at the upper part of the pneumatic conveying bin pump, its function is to open or close the valve through the action of the steel cylinder, and discharge the residual gas in the pneumatic conveying bin pump to the storage bin.

　　03流态化装置

　　03 Fluidization device

　　流态化装置也称为气化室，是一种利用流态化技术对流体或固体颗粒进行物理或化学处理的化学设备。物理处理包括干燥、浸出、吸附和离子交换、颗粒混合、流固换热等操作，一般设置在气力输送仓泵的底部。气化室下部设有气化装置，气化装置由流化盘和流化布组成，中部设有喷射管。

　　Fluidization device, also known as gasification chamber, is a chemical equipment that uses fluidization technology to physically or chemically treat fluids or solid particles. Physical processing includes drying, leaching, adsorption and ion exchange, particle mixing, fluid solid heat exchange and other operations, generally set at the bottom of the pneumatic conveying bin pump. The lower part of the gasification chamber is equipped with a gasification device, which consists of a fluidized disc and a fluidized cloth, and a spray pipe is installed in the middle.

　　04气动卸料阀

　　04 Pneumatic discharge valve

　　气动卸料阀具有启闭动作可靠、密封性能好、阻力低、安装维护方便等特点，一般设置在气力输送仓泵出料口。气力输送仓泵输送时阀门打开，气力输送仓泵输送时阀门关闭。工作时，气缸通过活塞杆带动阀芯上下移动，从而打开或关闭阀门。

　　Pneumatic discharge valves have the characteristics of reliable opening and closing action, good sealing performance, low resistance, and easy installation and maintenance. They are generally installed at the discharge port of the pneumatic conveying bin pump. The valve is opened when the pneumatic conveying bin pump is conveying, and the valve is closed when the pneumatic conveying bin pump is conveying. During operation, the cylinder drives the valve core up and down through the piston rod, thereby opening or closing the valve.

　　05泵体

　　05 Pump body

　　作为整个输送系统的储料装置，泵体是一个耐磨、抗疲劳的压力容器，能长期承受气流和物料的冲刷磨损。

　　As the storage device of the entire conveying system, the pump body is a wear-resistant and fatigue resistant pressure vessel that can withstand long-term erosion and wear from airflow and materials.

　　06电/气控制柜

　　06 Electric/Gas Control Cabinet

　　电气控制柜一般为气力输送仓泵，设控制柜。

　　The electrical control cabinet is generally a pneumatic conveying bin pump, equipped with a control cabinet.

　　气动控制箱为电磁阀箱。我公司一般采用不锈钢材料，也可根据客户需要选用。具有良好的防腐、抗震能力。箱体一般配备一个电磁阀，控制每个气力输送仓泵缸的运行。通常，气力输送仓泵配有电磁阀箱。

　　The pneumatic control box is an electromagnetic valve box. Our company generally uses stainless steel materials, but we can also choose according to customer needs. Has good anti-corrosion and seismic resistance. The box is usually equipped with an electromagnetic valve to control the operation of each pneumatic conveying bin pump cylinder. Usually, pneumatic conveying bin pumps are equipped with solenoid valve boxes.

　　本文由  仓泵    友情奉献.更多有关的知识请点击  http://www.sdyshjx.com/  真诚的态度.为您提供为全面的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

　　This article is a friendly contribution from Cang Pump For more related knowledge, please click http://www.sdyshjx.com/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Stay tuned