旋转供料器的检修过程

　　The maintenance process of the rotary feeder

　　了解到有不少地方的企业对使用旋转供料器的一些问题不是很清楚，在此为大家简单分析一下，合理的操作才会让星型卸料器正常运转，而想要保持卸料的顺畅只有使用好的设备了，使用的时候要重点考虑其运转是否符合要求，卸料的速度等环节是否属于正常，生产系统中进行灰尘等废物回收后就需要排除系统，这个设备的好坏对于灰尘的排出有着直接的影响，很显然必须对该设备的便用多加认识，就是要提高卸料设备的排料的顺畅，有时物料受高温，以及管道等影响形成了结块，这种情况的出现是很不好的。

　　I have learned that many companies in certain areas are not very clear about some issues related to the use of rotary feeders. Here is a brief analysis for everyone. Reasonable operation is necessary to ensure the normal operation of the star shaped unloader. To maintain smooth unloading, only good equipment can be used. When using it, it is important to consider whether its operation meets the requirements and whether the unloading speed and other links are normal. After dust and other waste recycling in the production system, the system needs to be eliminated. The quality of this equipment has a direct impact on the dust discharge. Obviously, it is necessary to have a better understanding of the usability of the equipment, which is to improve the smooth discharge of the unloading equipment. Sometimes, materials may form lumps due to high temperature and pipeline influence, which is very bad.

　　这些结块不规律的能进入卸料设备里，如果在生产中不能及时清理的话，就很容易对旋转供料器设备有不好的影响。只有确保运转的顺畅，才能确保收尘的完成，而这就需要确保操作星型卸料器时注意运转的状况，尤其是对灰尘的温度，是否有结块等异常要注意观察，确保其正常顺利的生产运行。作为除尘领域重要配套设施，星型卸料器主要在除尘设备排灰、送风和给料方面发挥着无可替代的作用，是除尘系统稳定运行的有力保障。

　　These irregular lumps can enter the unloading equipment, and if they are not cleaned in time during production, they can easily have a negative impact on the rotating feeder equipment. Only by ensuring smooth operation can the dust collection be completed, which requires paying attention to the operating conditions of the star shaped unloader, especially the temperature of the dust and whether there are any lumps or other abnormalities, to ensure its normal and smooth production operation. As an important supporting facility in the field of dust removal, star shaped unloaders play an irreplaceable role in the discharge, air supply, and feeding of dust removal equipment, and are a powerful guarantee for the stable operation of dust removal systems.

　　当旋转供料器发生故障怎么办呢，为大家讲述一下卸料器的检修过程:

　　What should I do if the rotary feeder malfunctions? Let me explain the maintenance process of the unloader:

　　一，在星型卸料器在出厂以前，应该把润滑油或润滑脂给填满，防止过早让卸料器的轴承发生损毁。不过在用了六个月后要及时增填或者更换润滑油，并且如果温度过高的话要加快填油的速度。

　　1、 Before leaving the factory, the star shaped unloader should be filled with lubricating oil or grease to prevent premature damage to the bearings of the unloader. However, after six months of use, it is necessary to promptly add or replace lubricating oil, and if the temperature is too high, the oil filling speed should be accelerated.

　　二，星型卸料器一般情况下都是连续工作的，如果在运转过程中有漏风或者漏灰事情发生的话，应该把压料盖给拧紧，或者直接更换一下石棉盘根再压紧料盖也可以的。

　　2、 Star shaped unloaders generally work continuously. If there is any air or dust leakage during operation, the material cover should be tightened or replaced with asbestos packing before tightening the material cover.

　　三，如果星型卸料器运送的是黏性较大的物料，造成了机器超载，应该及时安装过载防护设备或者把旧电机换掉，安装大功率的电动机。只有保证了收尘的排出正常才能更好的实现除尘，对于那些回收废气费物的系统来说，一定要及时检查排料设备的运行状况，而这就涉及到旋转供料器是否正常。在实际操作时也要看是否有漏灰的情况，如果有的话压紧相应的压料盖就可以。

　　3、 If the star shaped unloader transports materials with high viscosity, causing machine overload, overload protection equipment should be installed in a timely manner or the old motor should be replaced with a high-power motor. Only by ensuring the normal discharge of dust collection can dust removal be better achieved. For systems that recycle waste gas and materials, it is necessary to check the operation status of the discharge equipment in a timely manner, which involves whether the rotary feeder is normal. In practical operation, it is also necessary to check whether there is any leakage of dust. If there is, simply press the corresponding material cover tightly.

　　企业想要实现生产无污染也是离不开星型卸科器的应用，尤其这需要合理的较大程度发挥其使用功能，这包括操作技术的熟练程度等。但是要注意对于环境温度的控制，因为有些卸料器受温度的影响很大，尤其对于普通型的，这就要对物料进行降温处理了。

　　The application of star shaped unloaders is essential for enterprises to achieve pollution-free production, especially in terms of maximizing their functionality, including proficiency in operating techniques. However, attention should be paid to controlling the ambient temperature, as some unloaders are greatly affected by temperature, especially for ordinary types, which requires cooling treatment of the materials.

　　当然想要发挥卸料设备的极佳作用，更要求操作工的技术能力有保证，因为科学的操作不仅能发挥其功效，更能对其使用时间的延长有帮助。欢迎您前来洽谈合作，热情期待您的光临。

　　Of course, in order to fully utilize the unloading equipment, it is even more necessary to ensure the technical ability of the operators, because scientific operation can not only enhance its effectiveness, but also help extend its usage time. Welcome to discuss cooperation, we warmly look forward to your visit.